High-elasticity vinyl film for easy and crease-free fitting.
Film composed of 3 layers: a contact (base) film, a color film, and a surface film.
Total thickness 0,18mm.
Heat-resistant, tested from -50 ° C to +200 ° C.
Self-adhesive, ready to apply.
Sheet of 30x60cm.
Warning: this modification makes your motorcycle not conform to its origin, as such it is no longer strictly legal for use on road. The use of this article is your responsibility.
Warranty 12 months.
1. Tools required : heatgun or hairblower, vinyl squeegee, razor
2. Clean the light thoroughly
3. Cut a piece of the film, slightly larger than the surface to be covered
4. Ask a friend to help heat up the film during application
5. Apply film from the centre, removing any bubbles as they appear with the squeegee
6. Cut off any excess film