Application
- Moto Guzzi V7 all versions 2007-2020 (750cc, types LW...)
- Moto Guzzi V9 all versions 2016-2020 (type LH)
Not suitable for V7 versions 2021+ (850cc type KZA), V9 versions 2021+ (type MA), nor V85 TT.
Description
Pair of alloy replacement handles, milled from solid 6061-T6 aluminum billet on 5-axis CNC machine, polished and finished by anodizing.
Stainless steel screws and spacers.
Adjustable 6 positions.
Brake lever fitment
Remove the pivot bolt holding the original lever, then remove the lever. Lightly grease the pivot bolt then install the new lever to replace it. Be careful to leave a little "play" between the lever and the piston (when the brake fluid heats up it expands slightly). Tighten the fitment and check the operation of the brake light.
Clutch lever fitment
Important - it is very easy to damage the clutch switch when changing the lever, we strongly recommend removing the switch before the operation below to avoid this risk.
Disassemble the pivot bolt which holds the original lever then remove the lever without forcing (add WD40 if necessary and proceed step-by-step).
Loosen the adjustment of the clutch cable to the maximum then undo the cable from its guide.
Lightly grease the pivot bolt then install the new lever to replace it. Tighten the screw.
Adjust the cable tension.
Warranty 12 months.
There are no reviews written yet about this product..
